Finden Sie Roll Forming Dachmaschine, Kalte Rolle, Die Maschine Bildet auf Industry Directory, zuverlässige Hersteller / Lieferant / Fabrik aus China

Anfrage-Korb (0)
Home > Produkt-Liste > Wand- und Dach-Rolle, die Maschine bildet > Doppelschicht-Walzenformmaschine

Doppelschicht-Walzenformmaschine

Lieferzeit: 70 Tage

Basisinformation

Modell: WLDL

Produktbeschreibung

Doppelschicht-Dachbahn-Umformmaschine

Produktbeschreibung
WLDL Doppelschicht Dachblech Rollenformmaschine besteht aus Abwickler und seiner Basis, Einlaufführungen, feste Position angetriebene Formstationen,
Scher-Gerät, Hydraulik-Station, PLC-Control-Konsole und so weiter.Unsere Firma hat Hunderte von Profil-Modle für diese Serie
Walzenformmaschine, wie WLDL66-77, WLDL50-375, WLDL18-76 und usw.
Wir können die Maschine als Muster oder Profil entwerfen


Haupttechnische Parameter:
Model WLDL
Material Type Pre-paited steel sheet
Thickness 0.2-0.7 mm
Yield stress 230-550 Mpa
Max.Forming speed 8-12 m/min
Roller material 45#Steel with chrome treatment
Roller driven type Chain transmission
Controller PLC
Operation Touch screen and button
Hydraulic system pressure 12 Mpa
Hydraulic station motor power 5.5 KW
Main motor power 7.5KW
Total power 13 KW
Total weight About 10000 Kg
Index error of length 10m±2mm
Voltage 380V 3 phase 60Hz or at buyer's requirement

Arbeitsablauf:
Entleeren des Blattes ------ Bogenführung ------ Rollenformung ------ Betätigen der Tafel ------ Länge messen ------ Tafel schneiden ----- -Panels zum Unterstützer






Standardausrüstung der Maschine:
5 tons manual un-coiler   1                        
Pre-cutting device (manual)-optional   1
Guiding equipment   1
Film covring equipment   1
Roll forming equipment   1
Pressing equipment   1
Post-cut equipment   1
Hdraulic station   1
PLC control panel   1
Support tables   2  
Bestandteil und Funktion:
Coil Feeding Equipment  Consists of one uncoiler with capacity of 5000kgs and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction
Guiding Equipment Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Mainframe Transmission Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
Roll forming system  The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface.The rollers are surface-chromeplated after being machined by the exact machine tool.
Pressing equipment After formed the shape of the tile panel, pressing the tile panel with pressing equipment which ensures the shape lasting and more beautiful.
Post Cut Equipment   The length and blocks can be set by the buyer through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
PLC Control Panel The electric controlling system of this machine consists of five parts: operating system, screen, PLC, transducer and strong electricity part. The controlling system of this machine are imported from Mitsubishi company of Japan. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be choosed operation by manual or automatically.

Profilzeichnungen:


Material der Hauptausrüstung:

Roller Material High grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm

Active Shaft Material                            

High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft.
Electric Elements

PLC control panel, transducer imported from Mitsubishi of Japan.

Other elements are from famous suppliers of China.

Cutter blades Cr12 mould steel with quenched treatment.
Oil tank model of hydraulic system:CB-E310

Verpackung & Versand Hauptgerät der Maschine nake in Container geladen, mit Plastikfolie bedeckt, Ersatzteile in Holzkiste.


Unsere Dienstleistungen

Company Information Unsere Firma, Zhejiang Willing International Co., Ltd ist ein professioneller Anbieter auf dem Gebiet der Stahlkonstruktion Bau, vor allem gut bei der Herstellung von Forming Machine.


Produkt Show

Produktgruppe : Wand- und Dach-Rolle, die Maschine bildet

Mail an Lieferanten
  • *Fach:
  • Um:

  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein